VSM1519-M3 15mm lead screw adjustable lead screw length PM linear stepper motor
Description:
This is a 15mm permanent magnet stepper motor with M3 lead screw on top.
Lead screw length is customizable, we can adjust lead screw length based on customer’s space and travel distance requirement.
We do not provide nuts, customers please match lead screw nut themselves.
M3*P0.5 is very commonly used, and it is easy to find a nut to match.
For other parts, such as cable length, and connector type, are all customizable.
Default connector is PHR-4(2.0mm pitch, 4 pins connector)
We can change it into 1mm/1.25mm/1.5mm/2.0mm/2.5mm pitch connector.
Please confirm lead screw length, before you are ready to order samples.
Motor parameters:
| Motor type | Bipolar | Resistance | 15Ω/phase | Step angle | 18°/step |
| Voltage | 3~5V DC | Output shaft | 50mm M3 | Driving mode | 2-2 |
| Max Starting frequency | 500Hz(Min) | Max response frequency | 560Hz(Min) | Pull-out torque | 6g*cm (500 PPS) |
Design drawing:
Product display:
Application of stepper motors:
Stepper motors are used for precise control, widely used on medical equipment, 3D printer, industrial precise control, automation equipment, etc.
Stepper motors can be used in any mechanisms requirement precise conrtol and rotational/linear movement.
Advantage of stepper motors:
Stepper motor can reach precise control even without close-loop encoders / without feed back system, also they do not have electrical brushed. Thus there is no electromagnetic interference and electrical sparks issues. In some cases, they can replace DC brushed motors/ brushless motors.
Stepper motors are easy to control with drivers, and this feature establish its important position in the field of precise control.
1. Precise control achievable, programmable
2. Without electromagnetic interference & electrical sparks
3. Small size
4. Reasonable price
5. Low noise
6. Long service life
Product Tags:
|
|
VSM1519-M3 PM Stepper Motor 15mm Micro Stepper Motor With Lead Screw Adjustable Images
|
